NBS Klebebeschlag
HippoBlue "medical" NBS

HippoBlue "medical" NBS

Product No.:
0040
2 Weeks 2 Weeks (abroad may vary)
Weight:
0.069 kg per piece
from 16,50 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

product image

PM Hoof Pad Soft Small: Can A 350g + Can B 350g = 700g / 640cc The mixing ratio is: 50% PM hoof pad Soft A + 50% PM hoof pad Soft B The hardening time is 2-3 minutes
PM Hoof Pad Soft is an extremely light and shock-absorbing "high-tech" A + B component kneading silicone.
PM Hoof Pad Soft is used, for example, for
:
Laminitis Farfoot inflammation Inflammation of the hoof joint Toe joint arthrosis Sensitivity of the sole of the hoof Coffin bone fracture PM Hoof Pad Soft is placed in the cavity between the frog support and the balance bar.

87,50 EUR
Adhesive set universal "pony"
Here you will receive a universal adhesive set with special adhesive of your choice (red = thin liquid) (blue = viscous)
Consisting of :
2 mounting collar size pony
abrasive paper
Special glue 20g
manual
32,00 EUR

This product is similar to:

Wolf Busch adhesive collar

You will receive 1 Wolf Busch adhesive collar You will need one right and one left adhesive collar to attach to one hoof. For two hooves you will need two left and two right adhesive collars Proven weldable adhesive collars for easy and secure attachment to the hoof with a 1-component adhesive. The adhesive collars can be used even in less than ideal environmental conditions such as heat, cold or wet and still do their job reliably. Namely, to keep the shoe securely on the hoof for the entire shoeing period!

6,25 EUR
Spezialkleber Klebebeschlag dünn

Here you get a bottle of special glue red (20g) in the thin component.

or special blue glue (20g) in the thick component.

This glue is cyanoacrylate based and requires moisture. As a rule, the humidity of the hoof horn is sufficient. In extreme drought, it is useful to moisten the horn with a damp cloth. He should not be exposed to frost. The durability is about 1 year.
The bond is fixed within approx. 6 seconds (depending on the outside temperature). The adhesive cures under pressure.
When adhering, keep the pressure on the tab for at least 6 seconds.
The low-viscosity adhesive is our standard adhesive and highly recommended. To seal it is sometimes a bit too thin and bumps or air bubbles can be better injected with the blue viscous glue.
In cold temperatures, glue should be kept warm before use, for example in your pocket
Since the glue is very thin, it can hardly compensate for extreme bumps in the horn.

12,04 EUR
For more information, please visit the home page for this product.